Problem Statement: ME Board October 1995
A hollow shaft has an inner diameter of 0.035 m and an outer diameter of 0.06 m. Compute for the torque in N-m, if the stress is not to exceed 120 MPa.
- A. 4500
- B. 4100
- C. 4300
- D. 4150
Problem Answer:
The equivalent torque is 4500 N-m.
This content is for Premium Member. Tired of ads?
Subscribe To Unlock The Content! and Remove Ads.
- Solution: What is the value of the maximum moment of the beam due to this load?
- Solution: What is the value of the maximum shear of the beam due to this load?
- Solution: A beam supported at both ends and carrying a uniformly distributed load
- Solution: What is the maximum moment of the beam?
- Solution: What will the increase in length of an iron steam pipe when heated to 100°C?
- Solution: To what temperature the steel plate must be heated?
- Solution: Compute the value of the Young’s modulus of the copper wire
- Solution: Determine the required diameter of a steel wire
- Solution: How much is it elongated by a suspended body of mass 20 kg?
- Solution: Find the elongation of the aluminun if E = 69,116 MPa
- Solution: What power would a spindle 55 mm in diameter transmit at 480 rpm?
- Solution: Determine the polar moment of inertia of the hollow shaft
- Solution: Compute the nominal shear stress at the surface of a shaft
- Solution: Compute for the torque in N-m, if the stress is not to exceed 120 MPa
- Solution: What horsepower can be transmitted by a solid shaft?
- Solution: What is the modulus of elasticity given the stress and strain?
- Solution: Calculate the diameter of a solid shaft
- Solution: Calculate the required thickness in mm under a stress of 28,000 psi
- Solution: What is the stress in a 90-cm diameter pipe?
- Solution: Find the minimum thickness of the reservoir plating if the stress is limited to 50 MPa
- Solution: Determine the minimum thickness of the tank plating if the stress is limited to 40 MPa
- Solution: Compute the safe wall thickness of a 76.2 cm diameter steel tank
- Solution: What is the stress in a thin-walled spherical shell?
- Solution: Determine the diameter of the bolt required if the allowable shearing stress is 70 MPa
- Solution: What force is required to punch a ½-inch hole on a 3/8 thick plate?
- Solution: What force is necessary to punch a 0.75 inch diameter hole in a 0.625 inch thick plate?
- Solution: Determine the outside diameter of a hollow steel tube
- Solution: Find the diameter of the rod assuming a factor of safety of 5
- Solution: Calculate the stress on a circular rod
- Solution: Find the thickness of the wall if the allowable compressive stress is 10 MPa
More Questions in: Strength of Materials
Also Questions in: Engineering Mechanics Statics Problems
Also Questions in: Engineering Mechanics Dynamics
Online Questions and Answers in Strength of Materials
Related Content
P inoyBIX educates thousands of reviewers and students a day in preparation for their board examinations. Also provides professionals with materials for their lectures and practice exams. Help me go forward with the same spirit.
“Will you subscribe today via YOUTUBE?”
TIRED OF ADS?
- Become Premium Member and experienced complete ads-free content browsing.
- Full Content Access to Premium Solutions Exclusive for Premium members
- Access to PINOYBIX FREEBIES folder
- Download Reviewers and Learning Materials Free
- Download Content: You can see download/print button at the bottom of each post.
PINOYBIX FREEBIES FOR PREMIUM MEMBERSHIP:
- CIVIL ENGINEERING REVIEWER
- CIVIL SERVICE EXAM REVIEWER
- CRIMINOLOGY REVIEWER
- ELECTRONICS ENGINEERING REVIEWER (ECE/ECT)
- ELECTRICAL ENGINEERING & RME REVIEWER
- FIRE OFFICER EXAMINATION REVIEWER
- LET REVIEWER
- MASTER PLUMBER REVIEWER
- MECHANICAL ENGINEERING REVIEWER
- NAPOLCOM REVIEWER
- Additional upload reviewers and learning materials are also FREE
FOR A LIMITED TIME
If you subscribe for PREMIUM today!
You will receive an additional 1 month of Premium Membership FREE.
For Bronze Membership an additional 2 months of Premium Membership FREE.
For Silver Membership an additional 3 months of Premium Membership FREE.
For Gold Membership an additional 5 months of Premium Membership FREE.
Join the PinoyBIX community.
