adplus-dvertising

Practice Quiz in Wire and Wireless Communications System Part 10

(Last Updated On: December 21, 2017)Quiz in Wire and Wireless Communications System

This is the Online Practice Quiz in Wire and Wireless Communications System Part 10 as one of the Communications Engineering topic. In Preparation for the ECE Board Exam make sure to expose yourself and familiarize in each and every questions compiled here taken from various sources including but not limited to past Board Examination Questions in Electronic System and Technologies, Communications Books, Journals and other Communications References.

Continue Part X of the Online Practice Quiz

Quiz in Wire and Wireless Communications System

Question 91. A triple conversion superheterodyne receiver, diode mixer stages are

A. Operated in the linear region

B. Operated in the nonlinear region

C. Operated as Class-A amplifiers

D. Operated as Class-B amplifiers


Question 92. Which stage increases the selectivity of the circuit in an AM receiver?

A. Detector

B. IF stage

C. Modulator

D. Mixer


Question 93. What is an Erlang?

A. It is a unit of magnetic field intensity measured around a conductor

B. It is the number of erroneous bits received per unit of time

C. It a unit of electrical energy radiated in space.

D. It is equal to the number of simultaneous calls originated during a specific hourly period.


Question 94. The other name of Class 2 office in the North American Switching Plan.

A. Primary center

B. Section

C. Regional center

D. Toll points


Question 95. What is the frequency band of DECT?

A. 1.88 – 1.90 GHz

B. 1.68 – 1.70 GHz

C. 1.48 – 1.50 GHz

D. 1.28 – 1.30 GHz


Question 96. What is the beamwidth of the reflector of the receiving antenna in the base station?

A. 20 degrees

B. 30 degrees

C. 50 degrees

D. 60 degrees


Question 97. The resistance limit for No. 2 Crossbar Exchange (US) is

A. 1300 Ω

B. 2000 Ω

C. 1250 Ω

D. 1200 Ω


Question 98. ______ theory is deciding between a set of hypothesis when given a collection of imperfect measurements.

A. Estimation

B. Traffic

C. Decision

D. Nyquist


Question 99. The maximum voice energy is located between

A. 250 and 500 Hz

B. 1000 and 3000 Hz

C. 500 and 1000 Hz

D. 3000 and 5000 Hz


Question 100. How many simultaneous calls does a DECT radio transceiver can assess at any given time?

A. 120

B. 240

C. 480

D. 960

List of Practice Quizzes


Please do Subscribe on YouTube!

P inoyBIX educates thousands of reviewers and students a day in preparation for their board examinations. Also provides professionals with materials for their lectures and practice exams. Help me go forward with the same spirit.

“Will you subscribe today via YOUTUBE?”

Subscribe

What You Also Get: FREE ACCESS & DOWNLOAD via GDRIVE

TIRED OF ADS?

  • Become Premium Member and experienced fewer ads to ads-free browsing.
  • Full Content Access Exclusive to Premium members
  • Access to PINOYBIX FREEBIES folder
  • Download Reviewers and Learning Materials Free
  • Download Content: You can see download/print button at the bottom of each post.

PINOYBIX FREEBIES FOR PREMIUM MEMBERSHIP:

  • CIVIL ENGINEERING REVIEWER
  • CIVIL SERVICE EXAM REVIEWER
  • CRIMINOLOGY REVIEWER
  • ELECTRONICS ENGINEERING REVIEWER (ECE/ECT)
  • ELECTRICAL ENGINEERING & RME REVIEWER
  • FIRE OFFICER EXAMINATION REVIEWER
  • LET REVIEWER
  • MASTER PLUMBER REVIEWER
  • MECHANICAL ENGINEERING REVIEWER
  • NAPOLCOM REVIEWER
  • Additional upload reviewers and learning materials are also FREE

FOR A LIMITED TIME

If you subscribe for PREMIUM today!

You will receive an additional 1 month of Premium Membership FREE.

For Bronze Membership an additional 2 months of Premium Membership FREE.

For Silver Membership an additional 3 months of Premium Membership FREE.

For Gold Membership an additional 5 months of Premium Membership FREE.

Join the PinoyBIX community.

This offer has expired!

Add Comment

Shopee Store: JABEESHOP . © 2014-2023 All Rights Reserved | How to Donate? | Follow me on Blogarama DMCA.com Protection Status
error: Alert: Content selection is disabled!! (Subscribe to Enable)