
This is the Multiple Choice Questions Part 12 of the Series on Computer Network and Networking as one of the Communication Engineering (EST) and Electronics Engineering topics. In Preparation for the ECE Board Exam make sure to expose yourself and familiarize yourself in each and every question compiled here taken from various sources including but not limited to past Board Exam Questions in Communication Engineering and Electronics Engineering field, Communications Books, Electronics Books, Journals and other Communications and Electronics References.
Continue Practice Exam Test Questions Part 12 of the Series
⇐ MCQ in Computer Network and Networking Part 11 | ECE Board Exam
Choose the letter of the best answer in each question.
551. Which are the features present in IPv4 but not in IPv6?
A. fragmentation
B. header checksum
C. options
D. anycast address
Answer: Option D
Explanation:
552. _________ implies that all subnets obtained from the same subnet mask.
A. static subnetting
B. dynamic subnetting
C. variable length subnetting
D. dynamic length subnetting
Answer: Option A
Explanation:
553. Which of the following are Gigabit Ethernets?
A. 1000 base-sx
B. 1000 base-lx
C. 1000 base-cx
D. all of the mentioned
Answer: Option D
Explanation:
554. _________ is another kind of fiber optic network with an active star for switching.
A. s/net
B. sw/net
C. net/sw
D. fs/net
Answer: Option A
Explanation:
555. What is the subnet id of a host with an IP address 172.16.66.0/21?
A. 172.16.36.0
B. 172.16.48.0
C. 172.16.64.0
D. 172.16.0.0
Answer: Option C
Explanation:
556. The network address of 172.16.0.0/19 provides how many subnets and hosts?
A. 7 subnets, 30 hosts each
B. 8 subnets, 8,190 hosts each
C. 8 subnets, 2,046 hosts each
D. 7 subnets, 2,046 hosts each
Answer: Option B
Explanation:
557. Which type of Ethernet framing is used for TCP/IP and DEC net?
A. ethernet 802.3
B. ethernet 802.2
C. ethernet ii
D. ethernet snap
Answer: Option C
Explanation:
558. Which NetWare protocol works on layer 3–network layer—of the OSI model?
A. ipx
B. ncp
C. spx
D. netbios
Answer: Option A
Explanation:
559. Which NetWare protocol provides link-state routing?
A. nlsp
B. rip
C. sap
D. ncp
Answer: Option A
Explanation:
560. 0.0.0 router IGRP 109 network 172.68.7.0
A. it isolates networks 10.0.0.0 and 172.68.7.0
B. it loads igrp for networks 109 and 71
C. it disables rip
D. it disables all routing protocols
Answer: Option A
Explanation:
561. What does the “IPX maximum-paths 2” command accomplish?
A. it enables load sharing on 2 paths if the paths are equal metric paths
B. it sets up routing to go to network 2
C. it is the default for cisco ipx load sharing
D. it enables load sharing on 2 paths if the paths are unequal metric paths
Answer: Option A
Explanation:
562. Novell’s implementation of RIP updates routing tables every _________ seconds.
A. 60
B. 90
C. 10
D. 30
Answer: Option A
Explanation:
563. Which protocol should you select if the network diameter is more than 17 hops?
A. ripv1
B. ripv2
C. eigrp
D. both ripv1 and ripv2
Answer: Option A
Explanation:
564. How often does a RIPv1 router broadcast its routing table by default?
A. every 30 seconds
B. every 60 seconds
C. every 90 seconds
D. ripv1 does not broadcast periodically
Answer: Option A
Explanation:
565. Which command displays RIP routing updates?
A. show ip route
B. debug ip rip
C. show protocols
D. debug ip route
Answer: Option B
Explanation:
566. Default administrative distance of a static route is ________
A. 0
B. 90
C. 100
D. 1
Answer: Option D
Explanation:
567. Which protocol gives a full route table update every 30 seconds?
A. iegrp
B. rip
C. icmp
D. ip
Answer: Option B
Explanation:
568. _________ is the default administrative distance of RIP.
A. 0
B. 90
C. 120
D. 130
Answer: Option C
Explanation:
569. Which statement is true regarding classless routing protocol?
A. the use of discontinuous networks is not allowed
B. use of variable length subnet masks is permitted
C. ripv1 is a classless routing protocol
D. igrp supports classes routing within the same autonomous system
Answer: Option B
Explanation:
570. Where should we use default routing?
A. on stub networks- which have only one exit path out of the network
B. which has more than one exit path out of the network
C. minimum five exit paths out of the network
D. maximum five exit paths out of the network
Answer: Option A
Explanation:
571. Which statement is true regarding classless routing protocols?
A. the use of discontinuous networks is not allowed
B. the use of variable length subnet masks is permitted
C. ripv1 is a classless routing protocol
D. ripv2 supports classless routing
Answer: Option B
Explanation:
572. Which of the following is true regarding RIPv2?
A. it has a lower administrative distance than ripv1
B. it converges faster than ripv1
C. it has the same timers as ripv1
D. it is harder to configure than ripv1
Answer: Option C
Explanation:
573. Which of the situations might not require multiple routing protocols in a network?
A. when a new layer 2-only switch is added to the network
B. when you are migrating from one routing protocol to another
C. when you are using routers from multiple vendors
D. when there are host-based routers from multiple vendors
Answer: Option A
Explanation:
574. Which two routing protocols can be redistributed into OSPF by a Cisco router?
A. ip eigrp and appletalk eigrp
B. appletalk eigrp and ripv2
C. ripv2 and ip eigrp
D. ipx rip & appletalk eigrp
Answer: Option C
Explanation:
575. What does administrative distance rank?
A. metrics
B. sources of routing information
C. router reliability
D. best paths
Answer: Option B
Explanation:
576. Which protocol maintains neighbor adjacencies?
A. ripv2 and eigrp
B. igrp and eigrp
C. ripv2
D. eigrp
Answer: Option C
Explanation:
577. Which routing protocol implements the diffusing update algorithm?
A. is-is
B. igrp
C. eigrp
D. ospf
Answer: Option C
Explanation:
578. Which protocol should you select if the network diameter is more than 17 hops?
A. ripv1
B. ripv2
C. eigrp
D. ospf
Answer: Option B
Explanation:
579. In the network HTTP resources are located by __________
A. uniform resource identifier
B. unique resource locator
C. unique resource identifier
D. union resource locator
Answer: Option A
Explanation:
580. FTP server listens for connection on which port number?
A. 20
B. 21
C. 22
D. 23
Answer: Option B
Explanation:
581. In FTP protocol, a client contacts a server using ______ as the transport protocol.
A. transmission control protocol
B. user datagram protocol
C. datagram congestion control protocol
D. stream control transmission protocol
Answer: Option A
Explanation:
582. The File Transfer Protocol is built on __________
A. data centric architecture
B. service-oriented architecture
C. client server architecture
D. connection-oriented architecture
Answer: Option C
Explanation:
583. In File Transfer Protocol, data transfer cannot be done in __________
A. stream mode
B. block mode
C. compressed mode
D. message mode
Answer: Option D
Explanation:
584. Which methods are commonly used in Server Socket class?
A. public output stream get output stream ()
B. public socket accept ()
C. public synchronized void close ()
D. public void connect ()
Answer: Option B
Explanation:
585. The client in socket programming must know which information?
A. ip address of server
B. port number
C. both ip address of server & port number
D. only its own ip address
Answer: Option C
Explanation:
586. TCP, FTP, Telnet, SMTP, POP etc. are examples of ___________
A. socket
B. ip address
C. protocol
D. mac address
Answer: Option C
Explanation:
587. What does the java.net.Inet Address class represent?
A. socket
B. ip address
C. protocol
D. mac address
Answer: Option B
Explanation:
588. Which classes are used for connection-less socket programming?
A. datagram socket
B. datagram packet
C. both datagram socket & datagram packet
D. server socket
Answer: Option C
Explanation:
589. In Inet Address class, which method returns the host name of the IP Address?
A. public string get hostname ()
B. public string get hostaddress ()
C. public static inetaddress get localhost ()
D. public getbyname ()
Answer: Option A
Explanation:
590. Cookies were originally designed for ____________
A. client side programming
B. server side programming
C. both client side programming and server side programming
D. socket programming
Answer: Option B
Explanation:
591. The Cookie manipulation is done using which property?
A. cookie
B. cookies
C. manipulate
D. manipulate cookie
Answer: Option A
Explanation:
592. Which of the following explains Cookies nature?
A. non volatile
B. volatile
C. intransient
D. transient
Answer: Option D
Explanation:
593. Which attribute is used to extend the lifetime of a cookie?
A. higher-age
B. increase-age
C. max-age
D. lifetime
Answer: Option C
Explanation:
594. Which of the following defines the Cookie visibility?
A. document path
B. local storage
C. session storage
D. all of the mentioned
Answer: Option D
Explanation:
595. Which of the following can be used to configure the scope of the Cookie visibility?
A. path
B. domain
C. both path and domain
D. server
Answer: Option D
Explanation:
596. How can you set a Cookie visibility scope to local Storage?
A. /
B. %
C. *
D. #
Answer: Option A
Explanation:
597. Which of the following is a Boolean cookie attribute?
A. bool
B. secure
C. lookup
D. domain
Answer: Option B
Explanation:
598. What is the constraint on the data per cookie?
A. 2 kb
B. 1 kb
C. 4 kb
D. 3 kb
Answer: Option C
Explanation:
599. What does REST stand for?
A. represent state transfer
B. representational state transfer
C. representing state transfer
D. representation state transfer
Answer: Option B
Explanation:
600. Which of the following HTTP methods should be idempotent in nature?
A. options
B. delete
C. post
D. head
Answer: Option B
Explanation:
- MCQ in Computer Network and Networking Part 20 | ECE Board Exam
- MCQ in Computer Network and Networking Part 19 | ECE Board Exam
- MCQ in Computer Network and Networking Part 18 | ECE Board Exam
- MCQ in Computer Network and Networking Part 17 | ECE Board Exam
- MCQ in Computer Network and Networking Part 16 | ECE Board Exam
- MCQ in Computer Network and Networking Part 15 | ECE Board Exam
- MCQ in Computer Network and Networking Part 14 | ECE Board Exam
- MCQ in Computer Network and Networking Part 13 | ECE Board Exam
- MCQ in Computer Network and Networking Part 12 | ECE Board Exam
- MCQ in Computer Network and Networking Part 11 | ECE Board Exam
- MCQ in Computer Network and Networking Part 10 | ECE Board Exam
- MCQ in Computer Network and Networking Part 9 | ECE Board Exam
- MCQ in Computer Network and Networking Part 8 | ECE Board Exam
- MCQ in Computer Network and Networking Part 7 | ECE Board Exam
- MCQ in Computer Network and Networking Part 6 | ECE Board Exam
- MCQ in Computer Network and Networking Part 5 | ECE Board Exam
- MCQ in Computer Network and Networking Part 4 | ECE Board Exam
- MCQ in Computer Network and Networking Part 3 | ECE Board Exam
- MCQ in Computer Network and Networking Part 2 | ECE Board Exam
- MCQ in Computer Network and Networking Part 1 | ECE Board Exam
MCQ in Computer Fundamentals Series
Complete List of MCQ in Communications Engineering per topic
Complete List of MCQ in Electronics Engineering per topic
P inoyBIX educates thousands of reviewers and students a day in preparation for their board examinations. Also provides professionals with materials for their lectures and practice exams. Help me go forward with the same spirit.
“Will you subscribe today via YOUTUBE?”
TIRED OF ADS?
- Become Premium Member and experienced fewer ads to ads-free browsing.
- Full Content Access Exclusive to Premium members
- Access to PINOYBIX FREEBIES folder
- Download Reviewers and Learning Materials Free
- Download Content: You can see download/print button at the bottom of each post.
PINOYBIX FREEBIES FOR PREMIUM MEMBERSHIP:
- CIVIL ENGINEERING REVIEWER
- CIVIL SERVICE EXAM REVIEWER
- CRIMINOLOGY REVIEWER
- ELECTRONICS ENGINEERING REVIEWER (ECE/ECT)
- ELECTRICAL ENGINEERING & RME REVIEWER
- FIRE OFFICER EXAMINATION REVIEWER
- LET REVIEWER
- MASTER PLUMBER REVIEWER
- MECHANICAL ENGINEERING REVIEWER
- NAPOLCOM REVIEWER
- Additional upload reviewers and learning materials are also FREE
FOR A LIMITED TIME
If you subscribe for PREMIUM today!
You will receive an additional 1 month of Premium Membership FREE.
For Bronze Membership an additional 2 months of Premium Membership FREE.
For Silver Membership an additional 3 months of Premium Membership FREE.
For Gold Membership an additional 5 months of Premium Membership FREE.
Join the PinoyBIX community.