Forouzan: MCQ in Congestion Control and Quality of Service

Print Friendly, PDF & Email
(Last Updated On: December 3, 2019)

Forouzan: MCQ in Congestion Control and Quality of Service

This is the MCQ in Congestion Control and Quality of Service from book the Data Communications and Networking 4th Edition by Behrouz A. Forouzan. If you are looking for a reviewer in datacom, topic in Electronics Systems and Technologies (Communications Engineering) this will definitely help you before taking the Board Exam.

Begin and Good luck!

Choose the letter of the best answer in each questions.

1. _______ is a flow characteristic that applications can tolerate in different degrees.

A) Reliability

B) Delay

C) Jitter

D) Bandwidth

View Answer:

Answer: Option B

Solution:

2. The _______ defines the maximum data rate of the traffic.

A) peak data rate

B) maximum burst size

C) effective bandwidth

D) none of the above

View Answer:

Answer: Option A

Solution:

3. In Frame Relay, the _____________ defines an average rate in bits per second.

A) access rate

B) committed burst size

C) committed information rate

D) excess burst size

View Answer:

Answer: Option C

Solution:

4. In ________ congestion control, policies are applied to prevent congestion before it happens.

A) open-loop

B) closed-loop

C) either (a) or (b)

D) neither (a) nor (b)

View Answer:

Answer: Option A

Solution:

5. In ________ we try to avoid traffic congestion.

A) congestion control

B) quality of service

C) either (a) or (b)

D) both (a) and (b)

View Answer:

Answer: Option A

Solution:

6. _________ is a characteristic that a flow needs. Lack of it means losing a packet or acknowledgment, which entails retransmission.

A) Reliability

B) Delay

C) Jitter

D) Bandwidth

View Answer:

Answer: Option A

Solution:

7. In a network, after the load reaches the capacity, throughput _______.

A) increases sharply

B) increases proportionally with the load

C) declines sharply

D) declines proportionally with the load

View Answer:

Answer: Option C

Solution:

8. In _________ queuing, the packets are assigned to different classes and admitted to different queues. The queues, however, are weighted based on the priority of the queues; higher priority means a higher weight. The system processes packets in each queue in a round-robin fashion with the number of packets selected from each queue based on the corresponding weight.

A) FIFO

B) priority

C) weighted fair

D) none of the above

View Answer:

Answer: Option C

Solution:

9. In ATM, the _________ class is a best-effort delivery service that does not guarantee anything.

A) CBR

B) VBR

C) ABR

D) UBR

View Answer:

Answer: Option D

Solution:

10. The________ normally refers to the maximum length of time the traffic is generated at the peak rate.

A) peak data rate

B) maximum burst size

C) effective bandwidth

D) none of the above

View Answer:

Answer: Option B

Solution:

11. In _______ congestion control, mechanisms are used to alleviate congestion after it happens.

A) open-loop

B) closed-loop

C) either (a) or (b)

D) neither (a) nor (b)

View Answer:

Answer: Option B

Solution:

12. _______ happens in any system that involves waiting.

A) Congestion

B) Jamming

C) Error

D) none of the above

View Answer:

Answer: Option A

Solution:

13. In the ________ algorithm of TCP, the size of the congestion window increases exponentially until it reaches a threshold.

A) slow-start

B) congestion avoidance

C) congestion detection

D) none of the above

View Answer:

Answer: Option A

Solution:

14. In Frame Relay, the user can never exceed the_________.

A) access rate

B) committed burst size

C) committed information rate

D) excess burst size

View Answer:

Answer: Option A

Solution:

15. In the ___________ algorithm of TCP, the size of the threshold is dropped to one-half, a multiplicative decrease.

A) slow-start

B) congestion avoidance

C) congestion detection

D) none of the above

View Answer:

Answer: Option C

Solution:

16. In _________, when a source makes a reservation, it needs to define a flow specification.

A) Integrated Services

B) Differentiated Services

C) Connectionless

D) Connection-Oriented

View Answer:

Answer: Option A

Solution:

17. A _________ traffic model has a data rate that does not change.

A) constant bit rate

B) variable bit rate

C) bursty

D) none of the above

View Answer:

Answer: Option A

Solution:

18. ________ is the variation in delay for packets belonging to the same flow.

A) Reliability

B) Delay

C) Jitter

D) Bandwidth

View Answer:

Answer: Option C

Solution:

19. A ___________ is a packet sent by a node to the source to inform it of congestion.

A) backpressure

B) choke packet

C) implicit signaling

D) explicit signaling

View Answer:

Answer: Option B

Solution:

20. In ATM, the _________ class delivers cells at a minimum rate. If more network capacity is available, this minimum rate can be exceeded.

A) CBR

B) VBR

C) ABR

D) UBR

View Answer:

Answer: Option C

Solution:

21. In the ________ traffic model, the rate of the data flow changes in time, with the changes smooth instead of sudden and sharp.

A) constant bit rate

B) variable bit rate

C) bursty

D) none of the above

View Answer:

Answer: Option B

Solution:

22. In __________, there is no communication between the congested node or nodes and the source. The source guesses that there is a congestion somewhere in the network from other symptoms.

A) backpressure

B) choke packet

C) implicit signaling

D) explicit signaling

View Answer:

Answer: Option C

Solution:

23. In a network, when the load reaches the network capacity, the delay _______.

A) increases sharply

B) decreases sharply

C) remains constant

D) cannot be predicted

View Answer:

Answer: Option A

Solution:

24. The technique of ________refers to a congestion control mechanism in which a congested node stops receiving data from the immediate upstream node or nodes.

A) backpressure

B) choke packet

C) implicit signaling

D) explicit signaling

View Answer:

Answer: Option A

Solution:

25. In ________ queuing, packets are first assigned to a priority class. Each class has its own queue.

A) FIFO

B) priority

C) weighted fair

D) none of the above

View Answer:

Answer: Option B

Solution:

26. In ________, queuing packets wait in a buffer (queue) until the node (router or switch) is ready to process them.

A) FIFO

B) priority

C) weighted fair

D) none of the above

View Answer:

Answer: Option A

Solution:

27. Traditionally, ________types of characteristics are attributed to a flow.

A) two

B) three

C) four

D) five

View Answer:

Answer: Option C

Solution:

28. In Frame Relay, the ___________ is the maximum number of bits in excess of Bc that a user can send during a predefined time.

A) access rate

B) committed burst size

C) committed information rate

D) excess burst size

View Answer:

Answer: Option D

Solution:

29. In a network, when the load is below the capacity of the network, the throughput ______________.

A) increases sharply

B) increases proportionally with the load

C) declines sharply

D) declines proportionally with the load

View Answer:

Answer: Option B

Solution:

30. In the __________ method, the signal is included in the packets that carry data.

A) backpressure

B) choke packet

C) implicit signaling

D) explicit signaling

View Answer:

Answer: Option D

Solution:

31. In a network, when the load is much less than the capacity of the network, the delay is _________.

A) at a maximum

B) at a minimum

C) constant

D) none of the above

View Answer:

Answer: Option B

Solution:

32. Congestion in a network or internetwork occurs because routers and switches have _______.

A) tables

B) queues

C) crosspoints

D) none of the above

View Answer:

Answer: Option B

Solution:

33. In _________, we try to create an appropriate environment for the traffic.

A) congestion control

B) quality of service

C) either (a) or (b)

D) both (a) and (b)

View Answer:

Answer: Option B

Solution:

34. In Frame Relay, the ________ bit warns the sender of congestion in the network.

A) BECN

B) FECN

C) either (a) or (b)

D) neither (a) nor (b)

View Answer:

Answer: Option A

Solution:

35. In Frame Relay, the ________ bit is used to warn the receiver of congestion in the network.

A) BECN

B) FECN

C) either (a) or (b)

D) neither (a) nor (b)

View Answer:

Answer: Option B

Solution:

36. The ________ is a function of three values: average data rate, peak data rate, and maximum burst size.

A) peak data rate

B) maximum burst size

C) effective bandwidth

D) none of the above

View Answer:

Answer: Option C

Solution:

37. In the _________ algorithm of TCP, the size of the congestion window increases additively until congestion is detected.

A) slow-start

B) congestion avoidance

C) congestion detection

D) none of the above

View Answer:

Answer: Option B

Solution:

38. In ATM, the _________ class is divided into two subclasses: real-time (VBR-RT) and non-real-time (VBR-NRT). VBR-RT is designed for those users who need real-time services (such as voice and video transmission) and use compression techniques to create a variable bit rate. VBR-NRT is designed for those users who do not need real-time services but use compression techniques to create a variable bit rate.

A) CBR

B) VBR

C) ABR

D) UBR

View Answer:

Answer: Option B

Solution:

39. Traffic ______ are qualitative values that represent a data flow.

A) controls

B) descriptors

C) values

D) none of the above

View Answer:

Answer: Option B

Solution:

40. _________ is a class-based QoS model designed for IP.

A) Integrated Services

B) Differentiated Services

C) Connectionless

D) Connection-Oriented

View Answer:

Answer: Option B

Solution:

41. In the ______ bucket algorithm, bursty chunks are stored in the bucket and sent out at an average rate.

A) leaky

B) token

C) either (a) or (b)

D) neither (a) nor (b)

View Answer:

Answer: Option A

Solution:

42. The _______ bucket algorithm allows idle hosts to accumulate credit for the future in the form of tokens.

A) leaky

B) token

C) either (a) or (b)

D) neither (a) nor (b)

View Answer:

Answer: Option B

Solution:

43. In ATM, the _________ class is designed for customers who need real-time audio or video services. The service is similar to that provided by a dedicated line such as a T line.

A) CBR

B) VBR

C) ABR

D) UBR

View Answer:

Answer: Option A

Solution:

44. In the ______ traffic model, the data rate changes suddenly in a very short time.

A) constant bit rate

B) variable bit rate

C) bursty

D) none of the above

View Answer:

Answer: Option C

Solution:

45. In Frame Relay, a ___________ is the maximum number of bits in a predefined time that the network is committed to transfer without discarding any frame or setting the DE bit.

A) access rate

B) committed burst size

C) committed information rate

D) excess burst size

View Answer:

Answer: Option B

Solution:

Complete List of Chapter Quiz in Data Communications and Networking

Check your work.

Download File in PDF

DOWNLOAD PDF / PRINT
Print Friendly, PDF & Email
Show Simple Act of Caring!

Please consider subscribing to our YouTube Channel for engineering video tutorials. You can also find us on Twitter and Facebook. Lastly, Our app is now available on Google Play, Pinoybix Elex

Add Comment

© 2014 PinoyBIX Engineering. © 2019 All Rights Reserved | How to Donate? | Follow me on Blogarama DMCA.com Protection Status
Do NOT follow this link or you will be banned from the site!

Math Solution

Advanced Math problem age work mixture digit motion Analytic Geometry 01 problem Analytic Geometry 02 problem clock variation progression misc Combination problem Differential Calculus 01 Problem Differential Calculus 02 Problem Differential Equations Problem Fundamentals in Algebra Fundamentals in Algebra Problem Integral Calculus problem Permutation problem Plane Geometry problem Plane Trigonometry problem Probability problem quadratic equation binomial theorem logarithms Solid Geometry problem Spherical Trigonometry problem System of Numbers Problem Venn Diagram Problem

Questions and Answers in Mathematics

video

Pre-board in Electronics Engineering

Pre-board in Electronics Engineering - Answers

Questions and Answers

Basic Television - Grob TV Boylestad Questions and Answers Computer Principles Electrical Circuit Electricity and Magnetism Fundamentals Electronic Circuits Floyd Questions and Answers Floyd Self-test Grob Questions and Answers Industrial Electronics Principles and Applications Microelectronics Power Generators / Sources / Principles and Applications Solid State Devices Tests and Measurements Vacuum Tubes

Pre-board in Communications Engineering

Pre-board in Communications Engineering - Answers

Questions and Answers

Acoustics Antennas Blake Questions and Answers Broadcasting and Cable TV System Digital Communication Networks Forouzan Kennedy Questions and Answers Microwave Communications Miscellaneous Questions in Communications Modulation Navigational Aids and Radar Systems Noise Optical Fiber Communications Radiation and Wave Propagation Satellite Communications Transmission Fundamentals Wire and Wireless Communications

GEAS Solution

Dynamics problem Economics problem Physics problem Statics problem Strength problem Thermodynamics problem

Pre-board in GEAS

Questions and Answers in GEAS

Engineering Economics Engineering Laws and Ethics Engineering Management Engineering Materials Engineering Mechanics General Chemistry Physics Strength of Materials Thermodynamics
Online Tool: Electrical Charge Conversions
Online Tool: Electrical Charge Conversions
Online Tool: Color Code Conversions
Online Tool: Color Code Conversions
Online Tool: Weight Measurement Conversions
Online Tool: Weight Measurement Conversions
Online Tool: Temperature Measurement Conversions
Online Tool: Temperature Measurement Conversions
Consider Simple Act of Caring!: LIKE MY FB PAGE

Our app is now available on Google Play, Pinoybix Elex

Get it on Google Play